+- Carolina Broncos (https://cb4x4.com)
+-- Forum: 66-96 Ford Broncos (https://cb4x4.com/forum-7.html)
+--- Forum: Bronco Tech (https://cb4x4.com/forum-40.html)
+---- Forum: Build Threads (https://cb4x4.com/forum-11.html)
+---- Thread: Installing new Edelbrock intake & carb (/thread-2686.html)
Installing new Edelbrock intake & carb - Crawdad - 04-17-2011
broncosbybart Wrote:that is one way to do it. can't believe you couldn't find a tee.
Lowes was a poor place to look to begin with. I found a 1/8 T at AutoZone so i got it. Got it home and realized I need an adaptor for all ends b/c all is 3/8 NP. I have a good size Tap & Die set that had a 3/8 NP tap. I used the correct drill bit and tapped it out. Cleaned out all the shavings, added lithium tape and installed everything. Here is a pic of it installed.