Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Dodge in need...
#11
well, I called the dealer about the fuel line:banghead:$62 for a short 10" hard line-haven't ordered that, but I did buy 2 new interstate mega-tron batteries($160):rubeyes: I'll install them tomorrow,Chuck
77 built 306,Trickflow Cam/Alum Heads/dome pistons/10:1comp,nv3550,duff long arms,3.5" lift,family cage,protofab rear bumper,twin sticked, and 35KM2'sG.D.I.
Reply
#12
Are you talking about the plastic hardline or the metal?

I was able to modify all the plastic hardline on my. You can remove the locking fittings and move them down the line as you see fit with a little heat. I was even able to reform some of the lines too. Gotta be careful not to overheat or the line becomes too brittle and may burst under constant fatigue.
'77 351w- Explorer EFI, 4R70W, 4-link, lockers, 4.56, 35" MT/Rs with a severe rock addiction.Confusedmokin:
Roads? Where we're going, we don't need roads.

[Image: sig2.jpg]
Reply
#13
this one is metal with a banjo fittings on both sides. it split open and we cut the bad spot out and sleeved it with fuel line for a repair. guess I will have to fix it soon.
77 built 306,Trickflow Cam/Alum Heads/dome pistons/10:1comp,nv3550,duff long arms,3.5" lift,family cage,protofab rear bumper,twin sticked, and 35KM2'sG.D.I.
Reply
#14
Yep. You're screwed. Lay down some $$$ and pay the piper.
'77 351w- Explorer EFI, 4R70W, 4-link, lockers, 4.56, 35" MT/Rs with a severe rock addiction.Confusedmokin:
Roads? Where we're going, we don't need roads.

[Image: sig2.jpg]
Reply
#15
well, the dodge never let me down on the Tenn. trip a week ago. I got 12mpg on the way up/ and 12.5 on the way home(330 miles-1 way). The added horsepower/torque came in handy. I hit the Saluda grade(7 %) with plenty of pedal and power to spare. The highest EGT was 1250 degrees and right at 40 psi boost. I'm guessing I was still around 15,000 lbs. DODGE CUMMINS!!!!!!
77 built 306,Trickflow Cam/Alum Heads/dome pistons/10:1comp,nv3550,duff long arms,3.5" lift,family cage,protofab rear bumper,twin sticked, and 35KM2'sG.D.I.
Reply
#16
since the 3" exhaust fell off(broke) right in front of the axle(not weldable)...I ordered a complete from turbo back...5" straight system!!! installed it today. This is BADDAZZ! John(mudmonkey) even came by. Cant wait to jump on someone now...should run awesome!!!!
77 built 306,Trickflow Cam/Alum Heads/dome pistons/10:1comp,nv3550,duff long arms,3.5" lift,family cage,protofab rear bumper,twin sticked, and 35KM2'sG.D.I.
Reply
#17
That's gonna kick some tail! I'll have to yield when I see you coming.....or just floor itSmile
Reply


Forum Jump:


Users browsing this thread: 6 Guest(s)