|
Propane injrction hrlp
|
11-03-2010, 12:56 AM
So I have the system all setup. I get a click from the solenoid attached to the regulator but it wont fire. The motors runs fine on gas. Any Ideas Sorry I know its a little vague. Trying to get it running for this weekend.
68 Half cab
11-03-2010, 08:19 AM
do you have a vacuum or 12v solenoid that turns the propane on? sound like your pane isnt being turned on at the mixer. mine was a vacuum...so it took about a second or two before the pane turned on(while turnning the motor over). pane is super easy!!
77 built 306,Trickflow Cam/Alum Heads/dome pistons/10:1comp,nv3550,duff long arms,3.5" lift,family cage,protofab rear bumper,twin sticked, and 35KM2'sG.D.I.
11-03-2010, 12:12 PM
blazinchuck Wrote:do you have a vacuum or 12v solenoid that turns the propane on? sound like your pane isnt being turned on at the mixer. mine was a vacuum...so it took about a second or two before the pane turned on(while turnning the motor over). pane is super easy!! There Is a solenoid before the regulator (the round part with the coolant lines running through it) I was told it was suppose to click when you turn the key on. which it does. After that, thats all i know. Also is the cone thing in the mixer suppose to be up or down when u turn the motor over?
68 Half cab
11-03-2010, 11:41 PM
i done know what you mean by "cone thing"...i think i remember a spring button on the mixer, but thats it. you have to make sure valves are open. tank valve and the one at the mixer
77 built 306,Trickflow Cam/Alum Heads/dome pistons/10:1comp,nv3550,duff long arms,3.5" lift,family cage,protofab rear bumper,twin sticked, and 35KM2'sG.D.I.
11-03-2010, 11:48 PM
Got it covered. I did some digging this morning and found out how to prime the system. Did that and tweaked a few things and it fired right up. Are you running propane chuck? Thought you were EFI. Any idea of how much use you got out of a tank? I have a 10 and two 8 gal tanks. The 8's are full. Not sure how much the 10 has in it.
11-04-2010, 12:07 AM
i swear, if you show up without a bronco.......
'77 351w- Explorer EFI, 4R70W, 4-link, lockers, 4.56, 35" MT/Rs with a severe rock addiction.
 mokin:Roads? Where we're going, we don't need roads. ![[Image: sig2.jpg]](http://i288.photobucket.com/albums/ll176/mchuzie/sig2.jpg)
11-04-2010, 09:25 AM
glad to hear things are working now!!! looking forward to seeing all these broncos!
77 built 306,Trickflow Cam/Alum Heads/dome pistons/10:1comp,nv3550,duff long arms,3.5" lift,family cage,protofab rear bumper,twin sticked, and 35KM2'sG.D.I.
11-04-2010, 09:50 AM
it's alive!!! if i had any fancy equipment, i would share some pics/video. otherwise, you'll just have to wait a day or 2 to remind me of all the things i forgot to do.....
11-04-2010, 12:44 PM
good deal, cant wait to see it
77 built 306,Trickflow Cam/Alum Heads/dome pistons/10:1comp,nv3550,duff long arms,3.5" lift,family cage,protofab rear bumper,twin sticked, and 35KM2'sG.D.I.
|
|
« Next Oldest | Next Newest »
|
| Possibly Related Threads… | |||||
| Thread | Author | Replies | Views | Last Post | |
| propane | broncomania | 23 | 4,159 |
07-04-2008, 01:59 AM Last Post: broncomania |
|
