Posts: 510
Threads: 25
Joined: Feb 2010
Reputation:
0
well, I didn't do it today, but over the weekend, I replaced the clutch, main fuel line, adjusted the carb and choke, and fixed my fuel guage issues (sort-of). the fuel guage needs a good switch, but right now I have the auxiliary tank hard wired to the guage and working. this basically means I run the main tank empty with no guage, and then when I switch to the front tank the guage measures as advertised. a new switch will fix the problem right.
I took her out to the only hill in sumter on MLK day, and climbed it no problem. carb still gives some issues going nose down, but its much better than it was. still want efi, maybe after taxes...
anyway, there it is...
Posts: 1,252
Threads: 77
Joined: Nov 2010
Reputation:
0
Hill + Sick Pony = good pics! right?!! Let's see them! Will you be around this Friday?
[SIZE="2"]77 project bronco w/ 5.0 & c4, Sagi PS, 2 hard tops, eyebrow grill [/SIZE]
WANTED: auto column, gas tank, front/ rear seats
Posts: 4,530
Threads: 131
Joined: Nov 2005
Reputation:
0
Sorted a million nuts, bolts, washers, and misc bronco bits from my 5gal left overs bucket. Ugh. Took forever!
Sent from my GS3 on CyanogenMod with tapatalk2
'77 351w- Explorer EFI, 4R70W, 4-link, lockers, 4.56, 35" MT/Rs with a severe rock addiction. mokin:
Roads? Where we're going, we don't need roads.
![[Image: sig2.jpg]](http://i288.photobucket.com/albums/ll176/mchuzie/sig2.jpg)
Posts: 4,530
Threads: 131
Joined: Nov 2005
Reputation:
0
Oh, mounted my hi-lift jack on rear tire swing. Gas can next.
![[Image: y3ujahu3.jpg]](http://img.tapatalk.com/d/14/01/27/y3ujahu3.jpg)
Sent from my GS3 on CyanogenMod with tapatalk2
'77 351w- Explorer EFI, 4R70W, 4-link, lockers, 4.56, 35" MT/Rs with a severe rock addiction.mokin:
Roads? Where we're going, we don't need roads.
Posts: 6,190
Threads: 511
Joined: Oct 2005
Reputation:
0
looks good...is that the best ya can do ? lol
77 built 306,Trickflow Cam/Alum Heads/dome pistons/10:1comp,nv3550,duff long arms,3.5" lift,family cage,protofab rear bumper,twin sticked, and 35KM2'sG.D.I.
Posts: 4,530
Threads: 131
Joined: Nov 2005
Reputation:
0
Well considering the shitty foundation upon which i have to work, i think i managed just fine. Just rotated the eyelet 90 which allowed me to move jack 4" right. Hugs tire circumference better now
Sent from my GS3 on CyanogenMod with tapatalk2
'77 351w- Explorer EFI, 4R70W, 4-link, lockers, 4.56, 35" MT/Rs with a severe rock addiction.mokin:
Roads? Where we're going, we don't need roads.
Posts: 3,290
Threads: 141
Joined: Dec 2007
Reputation:
0
I don't like it. The jack needs to go more toward the right. What is the point of putting a high lift back there, if it doesn't stick out far enough to get snagged on something?
And no, I don't want to hear what temp it is down there right now. It's probably a balmy 40 degrees here. I do like that big wall mounted fan though.
Posts: 4,530
Threads: 131
Joined: Nov 2005
Reputation:
0
Hey, there is only enough room for one smart ass on this forum pal!
Sent from my GS3 on CyanogenMod with tapatalk2
'77 351w- Explorer EFI, 4R70W, 4-link, lockers, 4.56, 35" MT/Rs with a severe rock addiction.mokin:
Roads? Where we're going, we don't need roads.
Posts: 90
Threads: 2
Joined: Jan 2013
Reputation:
0
Started working on the back bumper swing out,it's going to have gas,water can and a cooler.
(For when Chuzie runs out of gas or gets to hot)
Hmmmm how much should a bumper swing out weigh?? Haha
Posts: 4,530
Threads: 131
Joined: Nov 2005
Reputation:
0
Fabbed holder and added gas can. Still pondering on locking mechanism.
Installed swing arm pivot lock.
![[Image: papydutu.jpg]](http://img.tapatalk.com/d/14/01/29/papydutu.jpg)
![[Image: aty9yra5.jpg]](http://img.tapatalk.com/d/14/01/29/aty9yra5.jpg)
Sent from my GS3 on CyanogenMod with tapatalk2
'77 351w- Explorer EFI, 4R70W, 4-link, lockers, 4.56, 35" MT/Rs with a severe rock addiction.mokin:
Roads? Where we're going, we don't need roads.
|
