10-03-2007, 10:32 PM
I've got most of my small brackets and pieces blasted, primed, and painted. I'm going to have to make a few tools to press out the old rubber bushings from the leaf springs. Picked up some new urathanes.
Also back tracking a bit, I'm pulling the Comp 255deh out in favor for a hotter Isky cam. I'm going to have to swap valve springs also. This cam should give me a "noticable" idle and flatten out the torque. So it won't make the peak 475 ft/lbs torque of the Comp cam, but will make over 400ft/lbs up to 4500 rpm.
Also back tracking a bit, I'm pulling the Comp 255deh out in favor for a hotter Isky cam. I'm going to have to swap valve springs also. This cam should give me a "noticable" idle and flatten out the torque. So it won't make the peak 475 ft/lbs torque of the Comp cam, but will make over 400ft/lbs up to 4500 rpm.