08-14-2008, 10:58 PM
We worked on the chassis tonight in prep for the body going back on this weekend. The brake lines and fuel lines are 95% done now - only lack a few more holes and taps for several more mounting places.
The brake lines runs down the upper arm with a steel line and has flexible lines on both ends connecting it to the axle and frame. We welded some tabs on the axle and arm for connecting points.
The fuel line supply has a low pressure pump feeding a high pressure pump. A LP filter is before the LP pump and a HP filter is behind the HP pump - may be overkill but better safe than sorry.
Here are a few pics of tonight's work.
The brake lines runs down the upper arm with a steel line and has flexible lines on both ends connecting it to the axle and frame. We welded some tabs on the axle and arm for connecting points.
The fuel line supply has a low pressure pump feeding a high pressure pump. A LP filter is before the LP pump and a HP filter is behind the HP pump - may be overkill but better safe than sorry.
Here are a few pics of tonight's work.
'74 Grocery Getter, '73 Project Buggy, '77 Parts Rig
![[Image: Bannerpic.jpg]](http://i259.photobucket.com/albums/hh295/SC74Bronco/Bannerpic.jpg)