10-25-2007, 01:58 PM
Many posibliltys, the banjo bolt is the same for many chevys. I would probably go with one from an S10 late 80's threw mis90's
You may need a metric adapter on the other end, or a new end to cut and flair on your line.
Most parts stores are carring braided brake hose with banjo ends and standerd line ends.
I would run the calipers to the axle and at the vent I would run a longer braided line to the frame.![[Image: gallery2.php?g2_view=core.DownloadItem&g2_itemId=1758]](http://www.carolinabroncos.com/phpBB2/gallery2.php?g2_view=core.DownloadItem&g2_itemId=1758)
broncomatt
You may need a metric adapter on the other end, or a new end to cut and flair on your line.
Most parts stores are carring braided brake hose with banjo ends and standerd line ends.
I would run the calipers to the axle and at the vent I would run a longer braided line to the frame.
broncomatt
[SIGPIC][/SIGPIC]