01-15-2009, 08:15 PM
I've read and heard a lot about the radius arms causing a lean. But when I first lifted my EB, 3.5" WH springs with add-a-leafs in the rear, I had about a .75-1" lean to the drivers side. I followed everyone's advice on the radius arms/bushings. Still had a lean that I could not get rid of. I ended up buying a new set of Cage leafs and problem solved. My best guess is that the factory springs were tired and the add-a-leaf just exaggerated the problem.
So my advice would be to swap the rear springs from side to side. See if the problem disappears or moves to the other side. Also the springs are oriented correctly with the double wrapped end to the front?
So my advice would be to swap the rear springs from side to side. See if the problem disappears or moves to the other side. Also the springs are oriented correctly with the double wrapped end to the front?
'72 TBA...