Project "Big Country" - Front Bumper Fab

[SC74]

And it will have a functioning tailgate with a little somenthing different also so stay tuned for this.

Here is the twist ... moved the F-O-R-D lettering to the center. We're going to end up chopping aprox 9" off each side so I would have lost the R and D. Plus we'll end up cutting out the rust under the lettering and the tailgate will be solid.

I cleaned it up and Keith came over after work. We switched the lettering over and came up with our game plan making the new tailgate mounts. Tomorrow we'll work on getting the wheel wells done, chop the tailgate, and start on the mounting frame work.