12-29-2009, 12:34 AM
I have used a fuel tank repair kit from NAPA on a metal motorcycle tank with good results. The kit had scotch bright, 2 part epoxy, mesh material, and stir stick.
It may be better if you drain and pull the tank. That way you can flip it upside down and don't have to fight gravity. It would also be good if you can get it inside where it is warm or you can put a light on it till it cures.
It may be better if you drain and pull the tank. That way you can flip it upside down and don't have to fight gravity. It would also be good if you can get it inside where it is warm or you can put a light on it till it cures.
'72 TBA...