The Love shack

[Badass]

picked up a sewer kit today. also had to get one rafter for the awning and 2 stabilizer jacks and some stick on levels. i have to go back to the rv place and get a skylight and some storage door locks and new door handle sets. and some trim pieces for the slider and the slide in rubber moulding around one exterior door.



I finished all but the back and one vertical corner of the aluminum angle. I also replaced the seal on the storage doors. I bought new lock cyl's for the doors also but they are the wrong size. I ordered the interior and exterior skylight pieces and one exterior light for the front today..$250...holy sheit. I am fast approaching the 6k mark. depending on the flooring i decide i still think ill be right at that and that 6k was my innital buying price for a camper. I am not counting the wheel chocks and sewer stuff or anything I would have had to buy regardless of what camper i got. like the hoses, pressure regulator, adapters etc. and i removed the stickers from the slider frame and cleaned up that area a bit












Guess I better get busy.... lots to do now.

got the tile for the counter top and thin set and a dry patch. they had the press on floor tiles on closeout so I picked up 3 boxes. Ill just do this the cheap rout for now till I can decide on better flooring. it was cheap. i got a latex floor prep also. I got new mini blinds throughout. I got some outside corner trim pieces for the interior. I got some wainscoting for the walls i had to tear out. might end up painting it for the living area part. i think it will go ok as is for the bedroom. got a bunch more silicone to finish up sealing the outside and dab the screw heads. also got a sheet of 3/4 ply to add another layer to the floor for the slider for a little more rigidity














put the other piece of ply on the floor of the slide. also put som angle for more wall support. I also started the wanescot












got the reese dual cam set up. took bout 3hrs
















Slider is about trimmed out. still have to get some latex and caulk the corners etc.