07-02-2011, 04:30 PM
i don't have a set of front gears. these are rears, or at least it came from a 60 rear axle. i'll bring them. if they don't work, no biggie.
you are going to be hard pressed to find an upper hose. I ended up using one of those metal corrugated hoses on the upper. the lower is an off the shelf part, cut to fit. i am running a stock oil cooler though. the hose goes to it, not the water pump inlet. i waded through the hose aisle at advance till i found one that would work. didn't find anything for the upper.
good luck w/the suspension. did you run any numbers on the setup?
you are going to be hard pressed to find an upper hose. I ended up using one of those metal corrugated hoses on the upper. the lower is an off the shelf part, cut to fit. i am running a stock oil cooler though. the hose goes to it, not the water pump inlet. i waded through the hose aisle at advance till i found one that would work. didn't find anything for the upper.
good luck w/the suspension. did you run any numbers on the setup?