02-13-2008, 05:45 AM
Hey man, I built one a while back and is is basicly a short piece of 1.25"x .330 wall tube with heims on each end. It monts to the top center of the rear axle and to the center of my inboard shock mount. it is adjustable and does not limit side to side articulation.
The only problem I see with useing flat bar is the mounting of it. Heims allow the axle to twist but not let the pinion raise up or wrap. If you bolt your flat bar solid it will solve the wrap issue but will limit you on your flex.
Mine is similar to this but w/ 2 heims, http://www.wildhorses4x4.com/product/Wra...sion_parts
you may also look at the tourque tamer for inspiration http://www.jamesduff.com/eb/tractionbars...izers.html
HTH
The only problem I see with useing flat bar is the mounting of it. Heims allow the axle to twist but not let the pinion raise up or wrap. If you bolt your flat bar solid it will solve the wrap issue but will limit you on your flex.
Mine is similar to this but w/ 2 heims, http://www.wildhorses4x4.com/product/Wra...sion_parts
you may also look at the tourque tamer for inspiration http://www.jamesduff.com/eb/tractionbars...izers.html
HTH
66 Rockrawler, 66 RestoMod
[SIGPIC] [/SIGPIC]
[SIGPIC] [/SIGPIC]