09-11-2011, 08:53 PM
been meaning to ask this...after changing my oil today(I remembered)
back when I 1st put this mustang 5.0 in the EB, I recall ppl saying to use the EB oil pan, well I did...problem is, the stock roller block dip stick wont hardly read anything on the stick! I was running both stock EB in pan and stock 5.0 in block. but the pan stick seem to leak, so I plugged it. I can fill pan with 5qta and just barely even touches stick. what gives???
from what i can tell, the dip stick tube is seated properly into the block and the bracket bolt to a header bolt.
what are yall using?? stock eb,stock 5.0, eb pan,mustang pan,etc
back when I 1st put this mustang 5.0 in the EB, I recall ppl saying to use the EB oil pan, well I did...problem is, the stock roller block dip stick wont hardly read anything on the stick! I was running both stock EB in pan and stock 5.0 in block. but the pan stick seem to leak, so I plugged it. I can fill pan with 5qta and just barely even touches stick. what gives???
from what i can tell, the dip stick tube is seated properly into the block and the bracket bolt to a header bolt.
what are yall using?? stock eb,stock 5.0, eb pan,mustang pan,etc
77 built 306,Trickflow Cam/Alum Heads/dome pistons/10:1comp,nv3550,duff long arms,3.5" lift,family cage,protofab rear bumper,twin sticked, and 35KM2'sG.D.I.