02-18-2013, 09:19 PM
When I installed the 306 I put a lil warmer stat in(180°) thinking this would be best...using a "fail safe". Well as I learned...you can't tell its bad unless...you just never get to temp.
So fast forward some... just before last novrun... I replaced it with stock style 185°⦠since then, been fighting the same problem. Today I decided to replace it AGAIN! Welp...surprise it some how got cocked!! Causing it to not reach temps. Installed a new 190° and after 3 attempts...truck got to 185,187,183 after 30 min cool downs. Each time temp was around 150 or so.
Sent from my DROID BIONIC using Tapatalk 2
So fast forward some... just before last novrun... I replaced it with stock style 185°⦠since then, been fighting the same problem. Today I decided to replace it AGAIN! Welp...surprise it some how got cocked!! Causing it to not reach temps. Installed a new 190° and after 3 attempts...truck got to 185,187,183 after 30 min cool downs. Each time temp was around 150 or so.
Sent from my DROID BIONIC using Tapatalk 2
77 built 306,Trickflow Cam/Alum Heads/dome pistons/10:1comp,nv3550,duff long arms,3.5" lift,family cage,protofab rear bumper,twin sticked, and 35KM2'sG.D.I.