09-11-2012, 05:34 PM
Roberts right, 200,210 is not too high a temp. Most ecms want to see 195 before it will run in closed loop. But with the ac it may go up from there. If it does it definetly sounds like a lack of air flow at higher rpms. You could counter this with a lower t-stat(I run a 160) or play with the fan shroud some. I'm guessing you dont have room for an aux fan. So how about an oil cooler. I was able to realy stablaize my temps with a remote oil filter housing and oil cooler. Shouldent your intake have had a bung for the temp sensor?
[SIGPIC][/SIGPIC]