10-18-2012, 08:41 AM
well, got the body lift ready and almost done...however, WH must have used 4 of the 8 bolts(then replaced them with 4 stockers) now i dont have 4 bolts long enough to finish body lift. hope a trip to lowes will cure that.
had to modify the rad mounts, spread the open some to fit the larger core radiator. also dropped the rad a 1" to help keep the fan centered in shroud.
now here's the part that pissed me off... found the new rad support was rubbing the front of steering box...so i thought i would make a simple cut and bend that lower part of support down and out of the way...so how i managed to use a pry bar right in the end cover of steering box!!:banghead::banghead::banghead::wtf:
anyone know where a new cover and seal can be had from??
had to modify the rad mounts, spread the open some to fit the larger core radiator. also dropped the rad a 1" to help keep the fan centered in shroud.
now here's the part that pissed me off... found the new rad support was rubbing the front of steering box...so i thought i would make a simple cut and bend that lower part of support down and out of the way...so how i managed to use a pry bar right in the end cover of steering box!!:banghead::banghead::banghead::wtf:
anyone know where a new cover and seal can be had from??
77 built 306,Trickflow Cam/Alum Heads/dome pistons/10:1comp,nv3550,duff long arms,3.5" lift,family cage,protofab rear bumper,twin sticked, and 35KM2'sG.D.I.