01-02-2013, 09:52 AM
woot woot!!!! removed the old restrictive 60mm MAF housing/sensor and installed a 70mm sensor/housing yesterday...think i got it from a crown vic. all my decel popping is gone!! i drove it today and hope to see it help with the richness.
brought in 2 throttle bodies today at work. making the swap from a stock 60mm mustang to a explorer 65mm. already swapped throttle bracket and rotated the vent tube in the top to match the mustang. some explorer TB's dont have this tube-mine did. next i gotta swap the TPS plug from the mustang onto the explorer TPS harness...then clean it all up and install on motor!
brought in 2 throttle bodies today at work. making the swap from a stock 60mm mustang to a explorer 65mm. already swapped throttle bracket and rotated the vent tube in the top to match the mustang. some explorer TB's dont have this tube-mine did. next i gotta swap the TPS plug from the mustang onto the explorer TPS harness...then clean it all up and install on motor!
77 built 306,Trickflow Cam/Alum Heads/dome pistons/10:1comp,nv3550,duff long arms,3.5" lift,family cage,protofab rear bumper,twin sticked, and 35KM2'sG.D.I.