02-27-2014, 12:54 AM
(This post was last modified: 02-27-2014, 12:59 AM by broncosbybart.)
Well, the seat brackets might not be very exciting but they sure took a while to make, so there they are. I still have to make the rear mounting brackets for the rear seat. I got sick of that though so I worked on the front seat mounting setup. Isn't ADD a wonderful thing? I can jump around from thing to thing and always have something to do because I never get anything done!
The front seat mount tube is all 1.75" .120 wall DOM as I didn't want to run 2" stuff here. If I had any 1.5" DOM, I would have used that. The seats are really tall and keeping the overall installed height reasonable is kind of challenging. Guess there are no good pics of the tube work yet. Sorry.
Here are a few pics of the bling bling door hinges and a test fit of the doors. I was sure to measure everything before I bent all the tube. Lo and behold- the doors fit with no issue! All the tubing clearances are great and the angles and fit look spot on. Enjoy!
The front seat mount tube is all 1.75" .120 wall DOM as I didn't want to run 2" stuff here. If I had any 1.5" DOM, I would have used that. The seats are really tall and keeping the overall installed height reasonable is kind of challenging. Guess there are no good pics of the tube work yet. Sorry.
Here are a few pics of the bling bling door hinges and a test fit of the doors. I was sure to measure everything before I bent all the tube. Lo and behold- the doors fit with no issue! All the tubing clearances are great and the angles and fit look spot on. Enjoy!