06-26-2014, 08:53 AM
Bulbs? duh. Sorry, have to ask. You would be surprised.
Do the hazards work? If they do, swap the blinker relay from the hazards to the turn signals to eliminate it as a possible offender.
Keep in mind the harness receives power from 3 sources and all are separate (hazards, brakes, and turn signals). If only your turn signals are not working and all the above conditions have been met, and you are running stock wiring harness configuration, you are looking at a main power distribution issue (i.e. blow fuse, grounded wire/short).
Do the hazards work? If they do, swap the blinker relay from the hazards to the turn signals to eliminate it as a possible offender.
Keep in mind the harness receives power from 3 sources and all are separate (hazards, brakes, and turn signals). If only your turn signals are not working and all the above conditions have been met, and you are running stock wiring harness configuration, you are looking at a main power distribution issue (i.e. blow fuse, grounded wire/short).
'77 351w- Explorer EFI, 4R70W, 4-link, lockers, 4.56, 35" MT/Rs with a severe rock addiction.
mokin:
Roads? Where we're going, we don't need roads.
![[Image: sig2.jpg]](http://i288.photobucket.com/albums/ll176/mchuzie/sig2.jpg)
mokin:Roads? Where we're going, we don't need roads.