07-05-2014, 03:18 PM
Ok if anyone has any suggestions I am game, here is where I am at. I have half wooden doors about like the tube doors built to put in the door jams but nothing to bolt them too. To lift the body I have 4 eye bolts in the middle 4 body mount holes.
My problem now is that the bed area wants to sag. I am debatting on a couple strategies not sure witch is best:
A. take the eye bolts out of the body mounts behind the seat and move them to the very back.
B. Take a piece of wood for each side and drill hols in it that line up with the very back body mount holes and the body mount holes behind the seat and bolt each piece in and put the eye bolts back in. Thinking of keeping eye bolts in the holes behind the seats and letting the boards lift the bed area.
Oh and I have chains running from the eye bolts to an engine hoist
My problem now is that the bed area wants to sag. I am debatting on a couple strategies not sure witch is best:
A. take the eye bolts out of the body mounts behind the seat and move them to the very back.
B. Take a piece of wood for each side and drill hols in it that line up with the very back body mount holes and the body mount holes behind the seat and bolt each piece in and put the eye bolts back in. Thinking of keeping eye bolts in the holes behind the seats and letting the boards lift the bed area.
Oh and I have chains running from the eye bolts to an engine hoist