07-25-2014, 09:44 AM
I have one water relief valve and most all the line gravity feed to this one point (first pic). I left plenty of room to add an air filter and dryer. These are 3/4" lines that will eventually go to 3/8" fittings. The other point where water goes is the tank itself. I bought a HF auto relief for the tank but it broke during installation.
My second outlet (second crooked pic) is 1/2" pipe to 1/4" fittings. It has two water filters which is overkill, one leaks bc it was a cheap HF purchase hence the reason for a 1/4" cut-off valve. At the moment this runs everything and works well. I just wish I had a 50' reel!
My second outlet (second crooked pic) is 1/2" pipe to 1/4" fittings. It has two water filters which is overkill, one leaks bc it was a cheap HF purchase hence the reason for a 1/4" cut-off valve. At the moment this runs everything and works well. I just wish I had a 50' reel!
[SIZE="2"]77 project bronco w/ 5.0 & c4, Sagi PS, 2 hard tops, eyebrow grill [/SIZE]
WANTED: auto column, gas tank, front/ rear seats
WANTED: auto column, gas tank, front/ rear seats