12-17-2014, 11:29 PM
(This post was last modified: 12-17-2014, 11:31 PM by broncosbybart.)
Jim 'Cheech' Garde at Cheech's Creative Concepts did the machine work. He's an old timer ex-nascar guy and is not the cheapest but he knows his stuff! The front axle is a Dynatrac and is already set up 5x5.5
Next order of business was to put the outer wheel bearings in the hubs, then the stupid snap ring, and after that the inner wheel bearing and grease seal. The bearings all get removed and installed from the inside face of the hub. I guess I forgot to get a pic of the axle with the hubs on. Will try and do that. I have some work to do on the brake mounts. The ones I have are straight (flat piece of metal) and they won't work as is. More to come soon.
Next order of business was to put the outer wheel bearings in the hubs, then the stupid snap ring, and after that the inner wheel bearing and grease seal. The bearings all get removed and installed from the inside face of the hub. I guess I forgot to get a pic of the axle with the hubs on. Will try and do that. I have some work to do on the brake mounts. The ones I have are straight (flat piece of metal) and they won't work as is. More to come soon.