12-31-2014, 10:40 PM
Thanks guys!
Coil overs are on order. Not really...
I did modify the oil pan to clear the front axle. I used the engine hoist to lift the front of the frame up and removed the coil springs. Then I lowered the frame down until the oil pan got close to the front dif. I marked out what to cut and got to it. After that, I bent up some sheet metal and cut it to fit. Got it all trimmed up and tacked into place. I took it to Chris at Mars Fab in Harrisburg and he TIG'd it all up for me all pretty like. Filled it with water and let it sit for a few hours. No leaks!
Coil overs are on order. Not really...
I did modify the oil pan to clear the front axle. I used the engine hoist to lift the front of the frame up and removed the coil springs. Then I lowered the frame down until the oil pan got close to the front dif. I marked out what to cut and got to it. After that, I bent up some sheet metal and cut it to fit. Got it all trimmed up and tacked into place. I took it to Chris at Mars Fab in Harrisburg and he TIG'd it all up for me all pretty like. Filled it with water and let it sit for a few hours. No leaks!