My little mule, Pe'pe

[broncomatt]

So what ended up happening with the misaligned door?

Sent from my GS3 on Cyanogenmod with the older / better version of Tapatalk!

I got a little crazy, I put some cuts in the B pillar and used 12ton ratchet straps to pull the quarters in the direction I needed. Once it sat for a while to loose the metal memory I then welded the cut back together. One other thing I found was that when I put the hinge post in on the pass side it ended too narrow at the top. While I was pulling the quarter I used my fancy tool (a scissor jack welded to 4" square stock) to spread the door jamb where I wanted it.
I also pulled the from end over, but the metal memory was too strong and it still came back some. I will try again once the grill is mounted since its only off by 1/8".