03-29-2015, 11:29 PM
Got some rock skis started! Plans are to make them removable from the frame so that I can still take the body on and off using the lift if I should so desire if/when it is all built and going.
The skis and the outriggers going from the frame are 2x4 3/16 wall. The skis will be bolted to the side of the frame using 1/4" steel plate and 1/2" bolts through the frame rails, which will be sleeved.
Got a good start on it all but I need to disassemble the whole thing before I install more sleeves, as some of them are close to interfering with cross members and other such nonsense.
They aren't done yet but at least are tacked and positioned where they should be. More to follow in the next few days.
The skis and the outriggers going from the frame are 2x4 3/16 wall. The skis will be bolted to the side of the frame using 1/4" steel plate and 1/2" bolts through the frame rails, which will be sleeved.
Got a good start on it all but I need to disassemble the whole thing before I install more sleeves, as some of them are close to interfering with cross members and other such nonsense.
They aren't done yet but at least are tacked and positioned where they should be. More to follow in the next few days.