07-30-2015, 01:52 PM
Wiring is fun! While on vacation I started working on my wiring diagrams for the harness modifications to move all switches to the center consol. Just swear your not using any aircraft safety wire.
Finished welding up my nerf bars, will hit them with a flap disk and paint them tonight. Then to weld them back onto the frame.
Finished welding up my nerf bars, will hit them with a flap disk and paint them tonight. Then to weld them back onto the frame.
chuzie Wrote:I mean the valves were chatty and the gauge wasn't hooked up yet. Inspected the oil pump shaft I replaced and found no issue so I used my spare 351w dizzy shaft, attached to a drill, to prime the piss out of the system. Seems fine now and pressure read 50psi.
Still working on wiring. Down to peripheral systems now (fans, winch, dual batteries, air, rock lights, and hellas). Fans have consumed most of my day. I'm building custom relay blocks for the automation.
Fun. Not really.
Sent from my GS3 on Cyanogenmod with the older / better version of Tapatalk!
[SIGPIC][/SIGPIC]