I ordered a pinion guard from Rough Stuff but could not get one of the bolts installed correctly due to a design flaw in the guard. They are sending me a newly design guard and it should arrive Saturday.
The driver side windshield brace that links the windshield to the roll bar snapped. This is the third brace I have installed and will soon be looking for an alternative mounting solution.
I found my ram assist hysraulic cylinder was leaking again after it received fresh seals in April. I am concerned it may be permanently damaged so it has been removed until I find the $ for a replacement.
The rim I all but destroyed at Tellico seems to be holding air well after our campsite beatdown so it just needs to be balanced.
I installed the tie rod "cure" from Ruff Stuff on the tie rod end that links the drag link to the tie rod. It works great and has help reduce some of the slop in my steering. I think my track bar bushings are shot (again) and need replacement.
Fuel tank armor is next on the priority list for both mine and Chuck's Bronco. We plan to use 1/4" aluminum sheet.
Crawdad, I am headed home to Tampa on Saturday and just received another offer from Uncle Sam to continue to fill my bank account for another 31 days starting August 18th. It is not in stone yet, so I would say there is a 50% chance of me being in Tampa for your arrival. Holler at me when you get there.
SCBronco, this is for you!!!
[ATTACH=CONFIG]9137[/ATTACH]
The driver side windshield brace that links the windshield to the roll bar snapped. This is the third brace I have installed and will soon be looking for an alternative mounting solution.
I found my ram assist hysraulic cylinder was leaking again after it received fresh seals in April. I am concerned it may be permanently damaged so it has been removed until I find the $ for a replacement.
The rim I all but destroyed at Tellico seems to be holding air well after our campsite beatdown so it just needs to be balanced.
I installed the tie rod "cure" from Ruff Stuff on the tie rod end that links the drag link to the tie rod. It works great and has help reduce some of the slop in my steering. I think my track bar bushings are shot (again) and need replacement.
Fuel tank armor is next on the priority list for both mine and Chuck's Bronco. We plan to use 1/4" aluminum sheet.
Crawdad, I am headed home to Tampa on Saturday and just received another offer from Uncle Sam to continue to fill my bank account for another 31 days starting August 18th. It is not in stone yet, so I would say there is a 50% chance of me being in Tampa for your arrival. Holler at me when you get there.
SCBronco, this is for you!!!
[ATTACH=CONFIG]9137[/ATTACH]
'77 351w- Explorer EFI, 4R70W, 4-link, lockers, 4.56, 35" MT/Rs with a severe rock addiction.
mokin:
Roads? Where we're going, we don't need roads.
![[Image: sig2.jpg]](http://i288.photobucket.com/albums/ll176/mchuzie/sig2.jpg)
mokin:Roads? Where we're going, we don't need roads.