09-05-2015, 10:54 PM
(This post was last modified: 09-05-2015, 10:58 PM by broncosbybart.)
Here are some pics of the lower radiator mounts. I added some 1" square tube to the bottom edge of the 1x1.5" tube. This gave more area to support the brackets.
I've started making the mounting locations for the upper brackets. I was going to mount them on the back side of the upper support tube work but for some reason the radiator angled way in at the top. So, I decided to notch the tube and will put the brackets close to the core support and will box it all in. Not quite done yet. More to come.
I've started making the mounting locations for the upper brackets. I was going to mount them on the back side of the upper support tube work but for some reason the radiator angled way in at the top. So, I decided to notch the tube and will put the brackets close to the core support and will box it all in. Not quite done yet. More to come.