mini buildup

[nhopman]

From Jeff's Bronco Graveyard

1966-1977 Ford Bronco Power Box!

- NEW Delphi 600 Power Box
- 14:1 Ratio Approx 3.75 Turns Lock to Lock
- 11/16”-36 Spline Input Shaft
- Fits Stock Factory Pitman Arm
- 14MM / 14MM Flare Hose Fittings
- Box Ships with 4 Bolts & Washers, Box bolts to frame in stock location with 3 Bolts, 4th can be drilled and used for extra strength.
- Standard 5yr / 50,000 Mile Warranty
- Made in the USA
This is not a direct replacement for the factory steering gear box. The Delphi box utilizes different hose fittings and input shaft gear spline size.
If you are running a Ford pump you will need Part #12826F hose kit
If you are running a Saginaw pump you will need Part #12826S hose kit

From BC Broncos.
The DELPHI BOX This box is found on Nissan's and Toyota's is new and has 4 mounting bolts but is designed for small tires. The mounting ears have a tendency to break off when stressed, the fittings are metric and it requires a different pitman arm. We wouldn't recommend using this box for tires bigger than 33". This box will bolt to the frame with 3 out of the 4 holes but requires other modifications.