Ms Piggy. Black and Blue!

[broncosbybart]

Thanks all!

The seam sealer is easy to work with, it was the masking tape that sucked. Much easier to do the job without using masking tape.

Been making some headway. The cowl and inner fenders are now black and blue!

The downpipe is fully welded and wrapped. Hopefully the wrap will help keep the heat off of the pass side floorboard area. The downpipe is about 3/4" away from it. Next was checking over all the bolts and stuff on the chassis and installing the body mounts. Finally, the tub was lowered into place!

Before I put the inner fenders on, I had to finish the steering ram mounts. Got those done, painted up, and steering linkage installed. Then it was time to put the inner fenders on! Starting to look like something!!

Oh, the wonky looking hole in the corner of the firewall is for a weather pack bulk-head connector. There is a hole on each corner of the firewall. I plan to make the wiring harness detatchable to make any future work easier, if I have to take it all apart once it is together.