Project "Big Country" - Front Bumper Fab

[SC74]

The patching continues....
Got more work done on the drivers side where the old charcoal cannister used to go and around the edge of the door lip to the striker post. We also welded in some 3/4" x 3/4" angle iron along the wheel well to bed to strengthen and hide all of the holes in that body line.

Once again, I'm relying on the bed liner to cover up the rough areas that's hard to get to and grind. Bed liner is ordered and should come in this week, but there's probably a day left of work in the bed and a day more on the underside before it's time to spray the under-body and set it up on the chassis upergrin:

Here's the pics...