05-14-2008, 02:50 PM
Carl - For some reason Ford had several different adapters between the 3 spd. and D20 and C4 and D20. Output shafts vary +/- an inch or so on different trans. I think this is right - I'm going off of a site I saw about a year ago when I was doing the same conversion.
If you can find a C4, hopefully it will still be mated to the D20 and you won't have to worry about finding a matching set. If you can find them mated already, it is a simple bolt on conversion - same x-member and same driveshaft angle, all you'd have to find is a auto shifter.
Let us know if you find one.
If you can find a C4, hopefully it will still be mated to the D20 and you won't have to worry about finding a matching set. If you can find them mated already, it is a simple bolt on conversion - same x-member and same driveshaft angle, all you'd have to find is a auto shifter.
Let us know if you find one.
'74 Grocery Getter, '73 Project Buggy, '77 Parts Rig
![[Image: Bannerpic.jpg]](http://i259.photobucket.com/albums/hh295/SC74Bronco/Bannerpic.jpg)