02-28-2011, 03:43 PM (This post was last modified: 11-28-2011, 02:07 PM by blazinchuck.)
starting a thread here for some upgrades coming very soon. Gonna be swapping the FBG 5.0EFI into the 77, installing a Centech harness, swapping FBG's 3.5 cage lift, and installing the Mojave heater. Hopefully I can find some 3 point seat belts from a wrangler...I found some a while back at LKQ(but didnt have the right tool to remove then)
planning the start this next weekend(after this weeks meeting), should have it all done for the meet/greet:beer:
77 built 306,Trickflow Cam/Alum Heads/dome pistons/10:1comp,nv3550,duff long arms,3.5" lift,family cage,protofab rear bumper,twin sticked, and 35KM2'sG.D.I.
aight, got to do a cool lil project tonight...installed a 3rd brake light on the tire carrier. its centered on the wheel mount. ill take some pics tomorrow
77 built 306,Trickflow Cam/Alum Heads/dome pistons/10:1comp,nv3550,duff long arms,3.5" lift,family cage,protofab rear bumper,twin sticked, and 35KM2'sG.D.I.
77 built 306,Trickflow Cam/Alum Heads/dome pistons/10:1comp,nv3550,duff long arms,3.5" lift,family cage,protofab rear bumper,twin sticked, and 35KM2'sG.D.I.
it has begun! yanked the 306 out...gutted the wiring harness, began installing the centech harness. got the stock heater box out and the new mojave heater mounted. the wiring is ran to the dash, and out the front fender area.
77 built 306,Trickflow Cam/Alum Heads/dome pistons/10:1comp,nv3550,duff long arms,3.5" lift,family cage,protofab rear bumper,twin sticked, and 35KM2'sG.D.I.