what have you wrenched on your bronco(s) today?

[snipes243]

Put the front end back together, then went cruising


Sent from my iPhone using Tapatalk

[Crawdad]

Box some of that white stuff and mail it to Columbia!

[Broncitis]

Its all Ice and Sleet here in Rockingham. Temp will likely fall below freezing again in a hour or so and its still raining now and then. Just hoping the power stays on.

[broncosbybart]

Nice! Looks cold though!

[wepuckett]

Yeah it has been snowing or sleeting all day havn't seen a plow one lol only trucks or suv's with 4x4 or 4wheelers all day. Probably 6 inches sitting on the hood of the bronco, can't see the lines on the edge of the hood.

[blazinchuck]

clay, what are we talking about on a "large order" for the daystar bushings? are they the ones making them for duff?

[snipes243]

clay, what are we talking about on a "large order" for the daystar bushings? are they the ones making them for duff?

Yes the bushings are a daystar off the shelf part. After talking to them if one was to purchase 200 bushings halfs. They could make a custom run on them. Meaning the durometer could be changed, so you could get an even harder bushing that has less movement in them.

[broncosbybart]

Wear seems to be the biggest issue. I'd love to see them made from rubber.

[snipes243]

Wear seems to be the biggest issue. I'd love to see them made from rubber.

From what I have read the rubber ones wear out faster? I'm pretty sure the original ones in mine were rubber.

[chuzie]

Poly was their hopeful fix for the rubber wear issue. Unfortunately, with the stress we apply to the system, poly can't withstand the pressure. A street rig would have no problem with poly.

We have even considered making them out of aluminum as most don't feel flex at that joint is critical.

A durometer near UHMW would be very cool.

Sent from my GS3 on Cyanogenmod with the older / better version of Tapatalk!