Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Voltage Issue
#1
My stereo amplifier recently started cutting out during acceleration. After speaking to the technical support line I learned that the amplifier has a built in voltage safety mechanism; they suggested I check the voltage. I'm getting a constant 15 volts at the amplifier which is above it's safety threshold.

I put a new alternator in last year so does this point to a bad voltage regulator?

Thanks in advance for troubleshooting advice :xyxthumbs:
[SIGPIC][/SIGPIC]
Reply
#2
Could be a bad regulator. 14.5V is about the upper end of normal for charging.
Reply
#3
I'm getting 16V at the battery with the engine cranked. IT drops to @ 14.5V with the headlights turned on. I assume this elevated charge level points to a defective alternator.
[SIGPIC][/SIGPIC]
Reply
#4
sounds like that to me...hopes its a simple fix
77 built 306,Trickflow Cam/Alum Heads/dome pistons/10:1comp,nv3550,duff long arms,3.5" lift,family cage,protofab rear bumper,twin sticked, and 35KM2'sG.D.I.
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Wiring and voltage drops Pup 2 1,173 10-18-2009, 11:17 PM
Last Post: sparkchaser

Forum Jump:


Users browsing this thread: 2 Guest(s)