12-23-2012, 02:24 PM (This post was last modified: 01-07-2013, 05:28 PM by Crawdad.)
I bought a new wiper motor cover from JBG and had hope of installing it soon. As I put it up there I notice the motor sorta sticks out too far to the right. Only thing I can think of is the lowering bracket that was needed for an old soft top. Please let me know if you have a spare to part with. Here are two pics taken today.
Thx Matt
[SIZE="2"]77 project bronco w/ 5.0 & c4, Sagi PS, 2 hard tops, eyebrow grill [/SIZE]
WANTED: auto column, gas tank, front/ rear seats
I posted pics only to show what I have and have missing. The one on the right I know I am missing. I believe there is only two brackets, OR is there more than two?
[SIZE="2"]77 project bronco w/ 5.0 & c4, Sagi PS, 2 hard tops, eyebrow grill [/SIZE]
WANTED: auto column, gas tank, front/ rear seats
There are only 2 tabs that are used to mount the cover on. It looks like the one on the left might be there, unless that is something else that was made for ??? I've got the tabs as well.
So let me get this straight, there are two tabs (one on each side) plus the wiper motor mount?
Do you have any of these? I bought new wiper arms and replacement refills. One of my blades were black plastic and looks nothing like the original metal one.
[SIZE="2"]77 project bronco w/ 5.0 & c4, Sagi PS, 2 hard tops, eyebrow grill [/SIZE]
WANTED: auto column, gas tank, front/ rear seats
the stock cover wont work with the dropped wiper bracket...with that being said, i modified mine to work. i had to cut a hole out of the right side so the wiper motor could stick out. krawlers edge makes one for the dropped wiper motor, but has no provisions for the visors.
77 built 306,Trickflow Cam/Alum Heads/dome pistons/10:1comp,nv3550,duff long arms,3.5" lift,family cage,protofab rear bumper,twin sticked, and 35KM2'sG.D.I.
The dropped wiper bracket is designed for the soft top but won't really need it no time soon. I want to use the visors since I bought four of them. I plan to put the other two above the doors with a kit from WHs.
[SIZE="2"]77 project bronco w/ 5.0 & c4, Sagi PS, 2 hard tops, eyebrow grill [/SIZE]
WANTED: auto column, gas tank, front/ rear seats
Crawdad Wrote:So let me get this straight, there are two tabs (one on each side) plus the wiper motor mount?
Do you have any of these? I bought new wiper arms and replacement refills. One of my blades were black plastic and looks nothing like the original metal one.
you should have gotten up with me on this stuff. i've got all of it, along with new refills sitting around... oh well.
yes, there are 2 tabs in addition to the wiper bracket.
