Posts: 637
Threads: 33
Joined: Feb 2015
Reputation:
0
I found the cause of the sag in my Bronco body today which resulted in my clutch linkage troubles.Both of the spacers which are located near the rear of the front seats for the body lift are missing. This allowed the body to sag. I can get a friend to turn me some 3 inch spacers to replace the 2 missing ones. Would any one have a single stock rubber spacer which is approximately 3/4 inch thick laying around. I'd like to find both halves for one side the upper and lower. Let me know what you have and what ya want fer it.
Posts: 525
Threads: 13
Joined: Jun 2014
Reputation:
0
Let me look and see if I have a partial set of body mounts, know I have a complete set maybe even 2 sets.
Posts: 525
Threads: 13
Joined: Jun 2014
Reputation:
0
I found a couple used body mounts with both the top and bottom, but if you have those 2 basically gone you might think about replacing all your body mounts. Let me know what you wanna do.
Posts: 402
Threads: 38
Joined: Feb 2006
Reputation:
0
William is right on the body mount thing. A new set isn't that much and all would be in the same condition, new or old. Not difficult to change, either.
74 Bronco Ranger halfcab w/toys: lockers f&r, wristed arm, C4, D20, hyd assist steering, 37"MTRs, warm 302. Capability, that's what I'm talkin' bout.
![[Image: 2rwp56f.png]](http://i38.tinypic.com/2rwp56f.png)
Posts: 4,530
Threads: 131
Joined: Nov 2005
Reputation:
0
So no one has a video of me coming up the right side of daniel?
Sent from my GS3 on Cyanogenmod with the older / better version of Tapatalk!
'77 351w- Explorer EFI, 4R70W, 4-link, lockers, 4.56, 35" MT/Rs with a severe rock addiction.
mokin:
Roads? Where we're going, we don't need roads.
![[Image: sig2.jpg]](http://i288.photobucket.com/albums/ll176/mchuzie/sig2.jpg)
Posts: 632
Threads: 21
Joined: Nov 2008
Reputation:
0
So % years later........reflecting back at 10th run! what a ball!
:xyxthumbs: ROCKNROLL!!
