+- Carolina Broncos (https://cb4x4.com)
+-- Forum: 66-96 Ford Broncos (https://cb4x4.com/forum-7.html)
+--- Forum: Bronco Tech (https://cb4x4.com/forum-40.html)
+--- Thread: vibration? (/thread-1394.html)
Pages:
1
2
vibration? - berg bronco - 04-12-2009
I have a vibration when I get up to 50mph I had the tires balenced any ideas
the tire shop guy said its my slip joint on my rear drive shaft. what do you guys think?
vibration? - blazinchuck - 04-12-2009
it could be, but still sounds like tires to me. claw under there and try to wiggle the drive shafts...see if there is a lot of play there...check all the u-joints. does the vibration go away after hitting 50? rotate the tires and see if that changes it too.
vibration? - berg bronco - 04-12-2009
the faster I go the worse it gets I'll get under there and check it out. thanks chuck
vibration? - Mill Knob - 04-12-2009
Make sure that all of your wheel nuts are tight first.:biggthumpup: Because I seen that you have aluminum rims and the wheel nuts are bad to come loose on them and you have to keep them tight. The other could be a bad U Joint. Just my two cents. Let use know what you find out.:xyxthumbs:
vibration? - berg bronco - 04-12-2009
I checked the lugs and the u joints there all good but the slip joint is loose. this is a recent problem and the slip joint has been like that for a while. I'll keep looking.
cratchhe:[tomorow]
vibration? - JayT - 04-13-2009
What kind of "vibration"? are we talking "death wobble", which would tell me ball joints or tires/lugs (or both) like mentioned above, or driveline vibration (felt in your seat, not steering wheel)... the latter would tell me u-joints... but you say that they're all good...
cratche:
vibration? - berg bronco - 04-13-2009
its a tight shake if that make sense it feels like the tires. I,m going to go do some more investegating right now.
vibration? - trkbilder - 04-13-2009
If you can, do what Chuck suggested, rotate your tires. If it is tires, the vibration should come back at a different speed, probably lower. If the vib doesn't change, at least you've eliminated one item on your list. Next go to the driveline and remember a vibration comes from something that moves. :xyxthumbs:
vibration? - berg bronco - 04-13-2009
I rotated the tires and greased the drive shaft still shakes so put the rear on jack tsands and it still shakes so it has to be in the rear. I did take the rear drum apart last week to fix my emergency cable but I put it all back correctly
could that have anything to do with it?
vibration? - trkbilder - 04-13-2009
Probably not unless you knocked a balancing weight off the drum. Not likely! Check all the joints from tranny back. Look for slop and or looseness. Engage tranny with rear-end on jack stands, foot on brakes. See if there is slippage any where. :xyxthumbs: