The following warnings occurred:
Warning [2] Undefined property: MyLanguage::$archive_pages - Line: 2 - File: printthread.php(287) : eval()'d code PHP 8.2.18 (Linux)
File Line Function
/inc/class_error.php 153 errorHandler->error
/printthread.php(287) : eval()'d code 2 errorHandler->error_callback
/printthread.php 287 eval
/printthread.php 117 printthread_multipage



Carolina Broncos
1990 Bronco Front Locking Hub Question - Printable Version

+- Carolina Broncos (https://cb4x4.com)
+-- Forum: 66-96 Ford Broncos (https://cb4x4.com/forum-7.html)
+--- Forum: Bronco Tech (https://cb4x4.com/forum-40.html)
+--- Thread: 1990 Bronco Front Locking Hub Question (/thread-1512.html)

Pages: 1 2

1990 Bronco Front Locking Hub Question - 2000F150SAS - 05-18-2009

We just replace out automatic hubs with locking hubs and the one hub seam a little loose, all the bolts are tight but it has a little wiggle in it. Is this ok or do i need to shim somthing?Confusedcratchhe:

Thanks, JOhn

1990 Bronco Front Locking Hub Question - trkbilder - 05-18-2009

All thrush washers installed in right place? Bearing pre-load the same? Weak spring? Could be a lot of things!! :xyxthumbs:

1990 Bronco Front Locking Hub Question - 2000F150SAS - 05-18-2009

Not really sure about washer or springs. We got the truck back from East Coast Gear last month after installing gears and they replaced the hub to manual hub for us. When i say movement I mean a LITTLE movement. Is a little movement bad???

Thanks

1990 Bronco Front Locking Hub Question - trkbilder - 05-18-2009

F1504x2 Wrote:Not really sure about washer or springs. We got the truck back from East Coast Gear last month after installing gears and they replaced the hub to manual hub for us. When i say movement I mean a LITTLE movement. Is a little movement bad???

Thanks

Mine doesn't move or wiggle at all. I'm not sure if "a little" is ok. Someone will tell you just be patient. :xyxthumbs:

1990 Bronco Front Locking Hub Question - supertoyota88 - 05-20-2009

there shouldnt be any play in a locking hub cuz it will let water in and mud or it can cuz it to fail on u while on the trails is it just one side

1990 Bronco Front Locking Hub Question - 2000F150SAS - 05-20-2009

Just one side and it's a only a small wiggle, i have pulled it off it still clean and dry and it's been like this for the past 4-6 weeks.Confusedcratchhe:

1990 Bronco Front Locking Hub Question - JayT - 05-20-2009

I don't like the sounds of that... It's normally just the opposite.. you have to push the outer axle out to get the locknut on all the way... I'd definitely give chase (ECGS) a call... if it's wrong, he'll make it right!

1990 Bronco Front Locking Hub Question - broncomatt - 05-20-2009

definetly take it back, if there is play in there it indicates a loose component. Posibly an incorrect spring or a missing part. Water will certanly get in there if you wheel like that.
New hubs should be super tight, some times they even feel to tight.
I would give them a call.
Broncomatt

1990 Bronco Front Locking Hub Question - 2000F150SAS - 05-21-2009

Any one have an exploded view of all item in the hub so i can check to make sure nothing is missing?

Thanks

1990 Bronco Front Locking Hub Question - JayT - 05-21-2009

F1504x2 Wrote:Any one have an exploded view of all item in the hub so i can check to make sure nothing is missing?

Thanks

Let me dig one up, if I don't already have it.... I'll post it up later today.