+- Carolina Broncos (https://cb4x4.com)
+-- Forum: 66-96 Ford Broncos (https://cb4x4.com/forum-7.html)
+--- Forum: Bronco Tech (https://cb4x4.com/forum-40.html)
+--- Thread: Need Advice on 351W Headers (/thread-1846.html)
Need Advice on 351W Headers - 73Bronc - 09-21-2009
I'm looking to purchase some headers for my EB. I have a 351W with manual tranny, so space is limited. Post up if you have a recommendation on headers that work well for this setup. Thanks in advance :xyxthumbs:
Need Advice on 351W Headers - bucketobolts - 09-21-2009
I run Hedman's on my 351W. They could use a bit of tweaking to get the collect on the pass side off the frame rail and the tubes get a bit close to the inner fenders. If it is in your budget get the Jet-Hot coating. I got the Elite coating and it did not last a year.
Need Advice on 351W Headers - 73Bronc - 09-22-2009
Thanks for the advice. I called Jet-Hot this morning. They have Hedman's that are 1.5 to a 2.5 collector for $352. The Hedman part number is 89410. Does this match your setup?
Need Advice on 351W Headers - snipes243 - 09-22-2009
If your real worried about space look into hooker headers. They are a fenderwell exiting header. I'm currently runing them on my 289. But will keep them when I swap in my 351 that's currently sitting in the shop. Also there was a guy on classic that was selling some real nice dyno tuned fenderwell header for a realy nice price. If I remeber right you could them coated and with duel flowmaster for like 400 something. I can find it if your intrested.
As for coatings check out calico coatings. They are local and have some awsome finishes for headers. They did a bunch of headers in this flat black finish for us at the race shop. And it holds up great no peel at all.
Need Advice on 351W Headers - bucketobolts - 09-22-2009
73Bronc Wrote:Thanks for the advice. I called Jet-Hot this morning. They have Hedman's that are 1.5 to a 2.5 collector for $352. The Hedman part number is 89410. Does this match your setup?
That is them. Just for comparison Summit list the Jet-Hot coated at $479.95. That is a great deal for $350. I believe I gave $300 for the Elite's.
Need Advice on 351W Headers - Felipe - 09-22-2009
Dang I just got a quote on a set of standard hedmans with sterling finish, and they said it would be 379.83, what finish are you looking at getting 73bronc .The elite's were 501.88 I can't swing that, but they do look nicer with the ball and socket, Also would the hedders interfere with a deep trans pan? sorry for the highjack
Need Advice on 351W Headers - 73Bronc - 09-22-2009
Felipe Wrote:Dang I just got a quote on a set of standard hedmans with sterling finish, and they said it would be 379.83, what finish are you looking at getting 73bronc .The elite's were 501.88 I can't swing that, but they do look nicer with the ball and socket, Also would the hedders interfere with a deep trans pan? sorry for the highjack
The quote I got was for the sterling finish
Need Advice on 351W Headers - 73Bronc - 09-22-2009
bucketobolts Wrote:That is them. Just for comparison Summit list the Jet-Hot coated at $479.95. That is a great deal for $350. I believe I gave $300 for the Elite's.
Thanks for confirming. Happy Birthday to me!
upergrin:
Need Advice on 351W Headers - Felipe - 10-14-2009
Just wandering if you recieved your hedders yet? I ordered mine about 3 weeks ago and havn't seen them yet, they still haven't charged me for them either, I called the guy and he said all is well so I guess I'll wait a little longer and see,(Starting to get impatient)
Need Advice on 351W Headers - wormhole - 10-15-2009
Supposedly BC's will fit with a 351/manual combo. They have a fitment table if you scroll down. I think they're shortys, dunno if that matters. http://www.bcbroncos.com/exhaust08.html