+- Carolina Broncos (https://cb4x4.com)
+-- Forum: 66-96 Ford Broncos (https://cb4x4.com/forum-7.html)
+--- Forum: Bronco Tech (https://cb4x4.com/forum-40.html)
+--- Thread: 8 lug and SAS (/thread-3242.html)
8 lug and SAS - Ron Burgandy - 09-23-2012
Has anyone done the 8lug conversion?
How to and what will I need? Just looking into it.
Im also looking into an sas on a fsb 1980 model.
Sent from a Bionic powerhouse
8 lug and SAS - blazinchuck - 09-24-2012
no advantage in going 8 lug unless its installing 1 tons. not sure what rear axle you have...the front should be pretty easy since its a form of d44(TTB). i doubt there is a conversion for the rear...i could be wrong
8 lug and SAS - Ron Burgandy - 09-24-2012
I have a 9" rear. Just going straight in the front
Sent from a Bionic powerhouse
8 lug and SAS - blazinchuck - 09-25-2012
in that case, you might be able to find a alum adapter to convert the 5 to 8 and also if you get the right thickness...you can make it match the front width. almost all front axles are normally wider than rears
8 lug and SAS - Ron Burgandy - 09-25-2012
The 8lug was just a thought I want to do a straight up front though
Sent from a Bionic powerhouse