Carolina Broncos
ford 250 inline 6 - Printable Version

+- Carolina Broncos (https://cb4x4.com)
+-- Forum: Salvage Yard (https://cb4x4.com/forum-5.html)
+--- Forum: Bronco Parts...buy/sell/free (https://cb4x4.com/forum-37.html)
+--- Thread: ford 250 inline 6 (/thread-3614.html)



ford 250 inline 6 - GOODOLEBOY84 - 04-15-2014

Hey guys looking for a 250 inline 6 cylinder, my 170 is tired and I like the 6 cyl but i
want to gain a little more power, anybody know where one is, doesnt matter if it needs to
be rebuild, kinda would perfer it that way. thanks Dustin


ford 250 inline 6 - scbronco - 04-15-2014

have you considered a 300? if your planning for the expense of a swap, the 300 would mean only doing it once as opposed to doing a 250 now and possibly considering a 300 or a v8 down the road. it does require some extra work due to the significent length issue, but i know some folks on classic have done it...


ford 250 inline 6 - scbronco - 04-15-2014

in either case, pull-a-part sells motors cheap, and since your planning to rebuild would be a fine place to start looking...


ford 250 inline 6 - GOODOLEBOY84 - 04-16-2014

I have but the more I looked into it the more I would have to modifiy, a 250 will bolt in other than the oil pan issue and bellhousing, which I already have, plus the 300 is a lot heavier than a 250, none of the pull-a-parts around here have any, ive been looking for a couple of months now, might just do a 200 instead not sure at the moment


ford 250 inline 6 - Phoneman - 05-14-2014

don't know if you are still looking but found this

http://fordsix.com/forum/viewtopic.php?f=86&t=71902