+- Carolina Broncos (https://cb4x4.com)
+-- Forum: 66-96 Ford Broncos (https://cb4x4.com/forum-7.html)
+--- Forum: Bronco Tech (https://cb4x4.com/forum-40.html)
+--- Thread: superflex springs (/thread-780.html)
superflex springs - gulfcrestinc - 06-18-2008
I have got my superflex coils for the front of my 79' and there there they the same height as the 9" superlift coils. my question is are the 6" rear leafs gonna be they roughly the same as the front?:rebel:
superflex springs - broncomania - 06-18-2008
gulfcrestinc Wrote:I have got my superflex coils for the front of my 79' and there there they the same height as the 9" superlift coils. my question is are the 6" rear leafs gonna be they roughly the same as the front?:rebel:
the super flex coils are tall. i used them in my 79 .just install them . it should be close. mine sat a hair taller than my buddies 78 on 9" skyjacker.
superflex springs - gulfcrestinc - 06-18-2008
i wasnt clear with my question. i was askin about the rear leafs, are they as tall as the front coils, I bought they front coils awile back and about to by the rear leafs
superflex springs - broncomania - 06-19-2008
gulfcrestinc Wrote:i wasnt clear with my question. i was askin about the rear leafs, are they as tall as the front coils, I bought they front coils awile back and about to by the rear leafs
if you have 6" superflex coils. you can buy 6" superflex leafs at bronco graveyard and thats all you need, no blocks. just use the stock shim wedges.
however , gubni is correct. stock leafs and a shackle flip flex far better in the rear.
superflex springs - gulfcrestinc - 06-19-2008
yeah right now i got 9" superlift in the front and in the rear i have shackle flip with 4" factory blocks from a 79' f250. i want to put all spring in the back. i'm buildin a mud/trail truck and don't want to spit a block out have fun. i just was wonder about the rears so i can get it sittin level when i'm done.
superflex springs - broncomania - 06-19-2008
here is how it will sit on 6" superflex coils and rear 6"superflex springs
thats with a 3" bodylift on 44" tires trimmed fenders
my old 79
![[Image: img_0595.jpg]](http://www.supermotors.net/getfile/441230/fullsize/img_0595.jpg)
superflex springs - gulfcrestinc - 06-19-2008
thats the set up i'm goin for ,thanks
superflex springs - 79BlueMule - 06-21-2008
so the super flex 6" really ends up measuring 9" of lift on a 79? how did you like those superflex springs, mania?
~Joseph
superflex springs - broncomania - 06-21-2008
79BlueMule Wrote:so the super flex 6" really ends up measuring 9" of lift on a 79? how did you like those superflex springs, mania?
~Joseph
pretty close to 8/8.5" they rode very good down the highway. my bronco had a 460 , one tons , 44" tires and i could pass cars on the highway in a 70 mph zone and maintain speeds of 80 mph with no problems. they flexed very good especially with the cage arms. but the rear didnt flex as good in very rough terrain. but did fine at ure.