|
Another Fine 69
|
06-17-2010, 10:12 PM
here are the last pics of the I6! tomorrow is d-day. pulled bumper and radiator few min ago. Im so ready to drop the newish power plant in. trading retired hamsters for rats on roids!
If you can't fix it with a hammer and a welder then your gonna need a new one!
06-18-2010, 02:58 PM
engine is out. on to tranny and t case next..
If you can't fix it with a hammer and a welder then your gonna need a new one!
06-21-2010, 06:52 PM
(This post was last modified: 06-21-2010, 09:55 PM by firefighter2134.)
got tranny and tcase on ground yesterday evening. now im gonna pull bronco out of the building and get some of the mud and gunk that is underneath. after that im ready to cut old mounts off. thanks chuck! u the man
If you can't fix it with a hammer and a welder then your gonna need a new one!
06-22-2010, 07:14 PM
(This post was last modified: 06-22-2010, 10:28 PM by firefighter2134.)
6cyl frame mounts off. wish i would have had a torch..side grinder and bfh whooped me..and it being 90 + degrees outside doesnt help..lol just a little bit of cleanup on frame and ill be ready to weld new mounts in.:banghead
 tarted cleaning up frame with grinder and cut finger. all this work and not a scratch. now i gotta find grinder i think it flew south for winter
If you can't fix it with a hammer and a welder then your gonna need a new one!
06-24-2010, 05:00 PM
so last night i welded in the v8 frame towers. its all downhill now. gonna drop the engine in do radiator mounts tranny and t case back in and she will be ready to go again! :beer:
If you can't fix it with a hammer and a welder then your gonna need a new one!
07-01-2010, 05:11 PM
(This post was last modified: 07-01-2010, 08:47 PM by firefighter2134.)
update: got my electric fan and controller in yesterday. engine mounts are painted, i am gonna go ahead and put in new clutch and then i will be ready to drop in engine and then on to radiator mounts...fired engine up again its ready..starts with just a bump of the push button starter i wired up! i have all next week off work so that will be as good of time as any! stoked :mug::gunshot:
If you can't fix it with a hammer and a welder then your gonna need a new one!
07-01-2010, 06:25 PM
Nice work :biggthumpup: ... post up some more pics
mokin:
Waiting to build or BUY another legend! :thefinger:
Always an EB fan, lover and freak :notworthy: 1985 Yoda 4Runner :xyxthumbs:
07-01-2010, 06:36 PM
i was wanting to do this as build thread. but i didnt take enough pics. but i do know what it took to get everything out or back in
If you can't fix it with a hammer and a welder then your gonna need a new one!
07-01-2010, 08:46 PM
ok for the radiator mounts...i bought the hangers from toms. i got the measurements for them but the 6 cyl radiator bolted to the core support i guess it was a factory thing do these have to be cut out for the v8 radiator? can anyone shoot me a pic of theirs? i would appreciate it.
If you can't fix it with a hammer and a welder then your gonna need a new one!
|
|
« Next Oldest | Next Newest »
|
