Posts: 6,190
Threads: 511
Joined: Oct 2005
Reputation:
0
Ok guys, This is from Pirate 4x4. I saw and instantly bought a set. I think Hick bought a set also. However, Ive been lazy and havent installed them as rock light yet. I did install 2 for interior lights under the dash...and i love'em. super bright! they also have the same set in other colors too!!
Cheap Rock Lights
im also planning to get more of these, once you have them...you'll find more uses for them. Im planning to also convert all roof mounted lights in our RV to these.
**word of caution** the shipping is free....BUT IT TAKES ONE MONTH FROM CHINA!
77 built 306,Trickflow Cam/Alum Heads/dome pistons/10:1comp,nv3550,duff long arms,3.5" lift,family cage,protofab rear bumper,twin sticked, and 35KM2'sG.D.I.
Posts: 6,190
Threads: 511
Joined: Oct 2005
Reputation:
0
be sure to look around...they have ALL KINDS
here's another set even cheaper
http://www.dealextreme.com/p/waterproof-...-12v-91925
also, if ya dont like the white housings or wiring...just tape off the LEDs and paint everything black
77 built 306,Trickflow Cam/Alum Heads/dome pistons/10:1comp,nv3550,duff long arms,3.5" lift,family cage,protofab rear bumper,twin sticked, and 35KM2'sG.D.I.
Posts: 247
Threads: 17
Joined: Dec 2010
Reputation:
0
I bought some of the first ones too... I havent gotten to install mine either, but did hook them up in the shop...
I have also thought about running these down the center of my trailer deck to aid in repairs/etc at night
Here is a pic of them in the shop
Ben...........Big Dixie Boggers........www.MudProMetalworks.com
Posts: 247
Threads: 17
Joined: Dec 2010
Reputation:
0
I also got some rare earth magnets too while there:
http://www.dealextreme.com/p/super-stron...x-1mm-5962
you can glue these to the back of the lights, and then just stick them on the chassis. Dont have to worry about bolt/screwing/3M tape
You will want to use rare earth magnets as they are much stronger then std magnets
Ben...........Big Dixie Boggers........www.MudProMetalworks.com
Posts: 6,190
Threads: 511
Joined: Oct 2005
Reputation:
0
thanks for the RE magnet link
have you tried one to see if its strong enough to hold the fixture?
77 built 306,Trickflow Cam/Alum Heads/dome pistons/10:1comp,nv3550,duff long arms,3.5" lift,family cage,protofab rear bumper,twin sticked, and 35KM2'sG.D.I.
Posts: 247
Threads: 17
Joined: Dec 2010
Reputation:
0
I have not tried it yet, but they are extremely difficult to pull off each other and metal when you stick just the magnet.
I believe they sell bigger magnets though
Ben...........Big Dixie Boggers........www.MudProMetalworks.com
Posts: 2,525
Threads: 67
Joined: May 2006
Reputation:
0
The rare earth magnets I have seen require a lever on them to break them loose. We use them on equipment-mounted laser accessories and they can hold a heavy receiver on a piece of equipment while it operates.
The lights look great!
'74 Grocery Getter, '73 Project Buggy, '77 Parts Rig
Posts: 446
Threads: 44
Joined: Oct 2007
Reputation:
0
They kind of look like this when mounted.
I mounted mine with magnets and left just a little slack in the wires to move them around a bit.
'73 Bronco - trail modified
Posts: 247
Threads: 17
Joined: Dec 2010
Reputation:
0
how many lights are those mounted? they look pretty bright, gets me excited...
Ben...........Big Dixie Boggers........www.MudProMetalworks.com