10-21-2008, 09:08 PM
They are around $100 each. I wanted to use a Johnny Joint or Ballistic Fab Jimmy Joint, but couldn't fit them in the bracket on the drivers side of the axle. The late model D60 only has 2 7/8" of tube on the drivers side to mount the brackets and suspension. Brackets are 5/16 thick each. That only gave me 2 1/4" to work with. Currie Ent makes a narrow Johnny Joint, but it mounts with a 7/16 bolt. My brackets came with 5/8 holes cut. So it was either the Evo's or regular Heims. So I've elected to use the Evo's on the bottom and Chromoly Heims on the top.
What wall tubing do you have? DOM or HREW? I'm going to use 2.5" .375 wall DOM for my lowers on the front.
I bought a JD2 HD tubing bender with a 240* 6" 1 3/4" die, stand, and notcher yesterday from a guy on another local board. I want to build a cart and add a hydraulic pump and cylinder to it. I'm too lazy to pull on a bar all day.
What wall tubing do you have? DOM or HREW? I'm going to use 2.5" .375 wall DOM for my lowers on the front.
I bought a JD2 HD tubing bender with a 240* 6" 1 3/4" die, stand, and notcher yesterday from a guy on another local board. I want to build a cart and add a hydraulic pump and cylinder to it. I'm too lazy to pull on a bar all day.
'72 TBA...