Thread Rating:
  • 1 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
my full width axle build 5/23/07->10/28/07
blazinchuck Wrote:Robert, how room to do have between the drive knuckle C and the diff? mine seems to only have barely 6"

Chuck - There is only 6" between the back of the knuckle and the casting for the leaf spring perch (measured on the front side of the axle). I've got my Cage bracket welded aprox 4" from back of knuckle, or 6" of end of axle tube. The cage bracket is very close to the old leaf spring mount - in fact we cut some of the leaf spring mount off with a cut off wheel to get enough room to weld that side of the bracket.

HTH
'74 Grocery Getter, '73 Project Buggy, '77 Parts Rig

[Image: Bannerpic.jpg]
Reply


Messages In This Thread
my full width axle build 5/23/07->10/28/07 - by SC74 - 12-20-2008, 10:56 PM

Possibly Related Threads…
Thread Author Replies Views Last Post
  Bertolini's '71 build blazinchuck 4 1,675 09-13-2015, 08:49 PM
Last Post: blazinchuck

Forum Jump:


Users browsing this thread: 34 Guest(s)