01-22-2008, 02:23 PM
(This post was last modified: 03-25-2008, 05:44 PM by blazinchuck.)
Let me start by saying that when I went outside I had every intention on starting my half doors, but when I got outside I figured I would go ahead and trim my fenders like the guy did on BII.org he did a pretty good write up on it so as I started to take the fenders off I started thinking I got this much off whats a few more parts so I decided to go ahead with the gen1 swap.
So far I have everything unbolted all the harness taken loose all that remains is drilling out the 20 or so spot welds and then the gen2 clip is off. Now I am not sure how others have done this swap but I am removing the inner fenders from the firewall not just taking the core support. I already have the Gen1 clip ready to go in just waiting on getting the gen2 out.
I also started to layout the cuts on the fender cause I am gonna trim them before I install them they will have a pretty wicked cut on them getting rid of a lot of metal.
in some of the pictures you will see blue tape I plan on cutting from the tape down meaning after the cut has been made the tape will still be there.
I should have it back together by the end of the week I will take notes and pics incase anyone is interested in the swap.
![[Image: 1088.jpg]](http://i2.photobucket.com/albums/y23/onewyr/Gen2%20to%20Gen1%20front%20clip/1088.jpg)
![[Image: 1087.jpg]](http://i2.photobucket.com/albums/y23/onewyr/Gen2%20to%20Gen1%20front%20clip/1087.jpg)
![[Image: 1090.jpg]](http://i2.photobucket.com/albums/y23/onewyr/Gen2%20to%20Gen1%20front%20clip/1090.jpg)
![[Image: 1091.jpg]](http://i2.photobucket.com/albums/y23/onewyr/Gen2%20to%20Gen1%20front%20clip/1091.jpg)
![[Image: 1092.jpg]](http://i2.photobucket.com/albums/y23/onewyr/Gen2%20to%20Gen1%20front%20clip/1092.jpg)
![[Image: 1095.jpg]](http://i2.photobucket.com/albums/y23/onewyr/Gen2%20to%20Gen1%20front%20clip/1095.jpg)
![[Image: 1097.jpg]](http://i2.photobucket.com/albums/y23/onewyr/Gen2%20to%20Gen1%20front%20clip/1097.jpg)
So far I have everything unbolted all the harness taken loose all that remains is drilling out the 20 or so spot welds and then the gen2 clip is off. Now I am not sure how others have done this swap but I am removing the inner fenders from the firewall not just taking the core support. I already have the Gen1 clip ready to go in just waiting on getting the gen2 out.
I also started to layout the cuts on the fender cause I am gonna trim them before I install them they will have a pretty wicked cut on them getting rid of a lot of metal.
in some of the pictures you will see blue tape I plan on cutting from the tape down meaning after the cut has been made the tape will still be there.
I should have it back together by the end of the week I will take notes and pics incase anyone is interested in the swap.