11-20-2011, 02:04 PM
FYI, be prepared to spend a TON of money on the tube! i picked up a used set of Duff's arms for $400 a while back. They are long gone, but by the time you buy 20' of tube and buy the 1-1/4" heims, you're gonna be close to the cost of a set of new arms!
Let us know what you decide to do. I built my frame mounts a little lower than stock, but not by much. You don't need to get them low. The longer arms actually help caster.
You can check my build thread for the ECORS racer to see how I made the frame mounts as well as the radius arms. I copied Keith and Robert on their design.
Let us know what you decide to do. I built my frame mounts a little lower than stock, but not by much. You don't need to get them low. The longer arms actually help caster.
You can check my build thread for the ECORS racer to see how I made the frame mounts as well as the radius arms. I copied Keith and Robert on their design.